<blockquote id="4ihgu"><wbr id="4ihgu"><input id="4ihgu"></input></wbr></blockquote>
  • <source id="4ihgu"></source>

  • <source id="4ihgu"><track id="4ihgu"></track></source>

    FOCUS ON SILENT MOTOR BEARING R&D AND MANUFACTURRING SINCE 1998

    Product Type 6

    Location: Home ProductsProduct Type 6

    1/4
    R Series Bearings

    Scan QR code

    Bearing series: Product Type 6

    Bearing life:up to 10 years

    Bearing accuracy:up to P5, P6 accuracy class

    Product certification:through Rohs, SGS and other testing certification

    Temperature environment:can be used in temperature environment from -60°C to +230°C

    Quantity:

    Add to Basket  

    Product Description
    Product Description

    Double row angular contact ball bearings can withstand large radial and axial combined loads and torque loads, limiting the axial displacement of both sides of the shaft. The tilting ability between the inner and outer rings of the double row angular contact ball bearing, which is mainly used to limit the bi-directional axial displacement of the shaft and shell, is limited. The allowable tilting angle depends on the internal clearance of the bearing, bearing size, internal design, and the forces and moments acting on the bearing. The allowable tilting angle should ensure that there is no excessive additional stress inside the bearing. If there is a tilt angle between the inner and outer rings of the bearing, it will affect the service life of the bearing, and at the same time cause a decrease in the operating accuracy of the bearing and an increase in operating noise.

    Product parameters

    Double row angular contact ball bearings generally use nylon cages or brass solid cages. When installing double row angular contact ball bearings, attention should be paid. Although the bearing can withstand bidirectional axial loads, if there is a ball gap on one side, attention should be paid not to let the main axial load pass through the groove edge on the side with the gap. When using bearings, attention should be paid to ensuring that the raceway on the side without the ball groove bears the main load.

    Application Area

    Angular contact ball bearings can withstand both radial and axial loads simultaneously. Capable of operating at higher speeds. The larger the contact angle, the higher the axial bearing capacity. High precision and high-speed bearings typically have a contact angle of 15 degrees. Under the action of axial force, the contact angle will increase.

    Advantages And Characteristics

    Single row angular contact ball bearings can only withstand axial loads in one direction, which will cause additional axial forces when subjected to radial loads. And can only limit the axial displacement of the shaft or shell in one direction. The contact angle of angular contact ball bearings is 40 degrees, so they can withstand significant axial loads. Angular contact ball bearings are non separable designs, with varying shoulder heights on both sides of the inner and outer rings. In order to improve the load capacity of the bearing, one side of the shoulder will be machined lower, allowing the bearing to accommodate more steel balls.

    Usage Guide

    Single row angular contact ball bearings: machine tool spindle, high-frequency motor, gas turbine, booster pump, drilling platform, food machinery, indexing head, welding machine, low-noise cooling tower, electromechanical equipment, etc

    Double row angular contact ball bearings: oil pump, Roots blower, air compressor, various transmissions, fuel injection pump, food packaging machinery, welding machine, soldering iron, square box, gravity spray gun, inspection and analysis equipment, fine chemical machinery, etc.

    Previous : None!

    Next : 69 Series Bearings

    So-And-So Machinery Manufacturing Co., Ltd. is a globally operational is located in Ningbo, a coastal city in China...Read More >

    ceshi@sina.com
    13212340000
    400-1000-000
    0310-1234567
    东北女口爆吞精视频_亚洲午夜福利精品久久_午夜激情视频黄色福利_国产三级片在线免费观看
    <blockquote id="4ihgu"><wbr id="4ihgu"><input id="4ihgu"></input></wbr></blockquote>
  • <source id="4ihgu"></source>

  • <source id="4ihgu"><track id="4ihgu"></track></source>